- Does the Zignito Smart Plug work as an extender/repeater?
Yes, the Zignito Smart Plug does work as an extender and repeater.
- Can I share an Ajax Online Zignito device with my family members or friends?
Yes, that’s possible. You can add as many devices as you want to an account, but a device can only be added to one account. You can share this account with up to five people e.g. family members or friends.
- Why don't I get the notifications with my mobile phone app?
Confirm that the app is active on the phone and the relevant reminder function is open; Message notifications and confirmation of the mobile telephone system are on.
- I cannot pair the plug with the Ajax Online ZIgnito Hub
Please reset the plug by holding the power button for 5 seconds until the LED starts flashing.
- The Ajax Online Zignito devices cannot connect to the network, what is the reason for this?
1. Check if the LED light on the Zignito Hub is flashing and the network is running, as usual. 2. Check if the devices are in range and connected to the Zignito hub 3. If this fails, please reset and pair the Zignito devices again.
Smart Lighting Products
Barry Hodgetts (verified owner) –
Easy to connect works well. Added bonus it gives the electricity used each day or month on the yearly tab in the app. The range seems better than wifi devices connected to the my Virgin hub.I think it acts to extend the network but it does not say that on the box so cant be 100% sure just an observation. It also works with the quick button when the wifi is down but of course you loose access to the app with out wifi connected to the hub.
Barry Hodgetts –
Mark Cater (verified owner) –
Zignito Zigbee Smart PlugExcellent smart plug, no effort at all to set up, update firmware etc.
Looks neat, and performs well as an extender.
Great service from Ajax as usual.
Mark Cater –
Tomasz Tonkowicz (verified owner) –
All good. Easy to pair. 5 second and is all done
Tomasz Tonkowicz –
Mark Manford (verified owner) –
Easy product and great sales advice
Mark Manford –
Simon Smiles –
The 250v protection means the plug turns its output off if the mains voltage is 250v or higher, which it can reasonably be in the UK, so these can and do turn themselves off when you don’t want them to. Hopefully a firmware update will fix. Would be a good product if they didn’t turn themselves off all the time.
Simon Smiles –
website-admin –
Hello Simon , Thank you for your feedback. We have now new stock with new firmware that resolved this issue. They now also works with Phillips Hue, SmartThings, Conbee, HomeAssistant and Our Zignito Zigbee Hub. Please note energy monitoring is not available on Hue and SmartThings.
Kind Regards
Ajax Online
website-admin –
Ian Wallace (verified owner) –
As a Home Assistant Zigbee network user looking to add automations to lamps, and energy monitoring on my larger appliances, this switch had more than the perfect plethora of functions for me. After a bit of tinkering, as the documentation that both came with the box and online weren’t very helpful, I figured out all the functionality of these plugs, and I cannot fault them in the slightest.
To help share what I found, as the documentations was notably lacking, and to help inform you better, here’s all the info you need:
Device info
– Device type: Router. (This device will extend the Zigbee network once connected)
Controls
– Switch: A toggle to turn on and off the power flowing through the switch.
Sensors
– Active power: Active Wattage
– Power factor: This comes up as unknown to me, so I do not know this functionality
– RMS current: Ampule measurement
– Summation delivered: Total kilowatt-hours (kWh) delivered over time
Configuration
– Backlight mode: Set when the power button on the switch is enabled (Off: Always off; LightWhenOn: Light is enabled when switch is enabled; LightWhenOff: Light is enabled when switch is disabled)
– Child lock: Disable power button functionality, meaning it can only be toggled remotely via the Switch control (or via the power socket directly)
– Power on state: State to return to when power is enabled from the socket (Off: Starts with power disabled; On: Starts with power enabled; LastState: Starts matching the previous state it saved prior to being disabled)
Overall, these plugs meet my usage needs, and are perfect for all the expected functions I’m looking to accomplish. I will definitely be purchasing more in the future, when the need arises.
Ian Wallace –